ROCOL DRY PTFE Spray is a non-toxic, non-staining dry PTFE lubricant, ideal for use in environments where wet lubricants cannot be tolerated, e.g. dusty environments such as paper mills and bakeries. Apply to pivots, links, pin and pulleys to prevent wear and extend component life. It is also ideal for use an as anti-stick agent on chutes and slides.
The dry film is made up of a high level of sub-micron PTFE that provides light but very long lasting protection, giving extended re-lubrication intervals. Utilises DETEX technology, x-ray and metal detectable plastic aerosol caps and actuators reduce risk of plastic contamination.
NSF H1 registered, ISO 21469, Halal and Kosher certified. WRAS approved for full audit compliance.
Specification
Temperature Range: -200°C to +270°C
COSHH Datasheet: Download 0373
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
P270 Do not eat, drink or smoke when using this product.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F.
GHS02 Flammable
GHS07 Health hazard/Hazardous to the ozone layer