ROCOL OXYLUBE Spray provides a very high content molybdenum disulphide film. It is designed to lubricate sliding mechanisms, particularly in oxygen or vacuum environments, such as: plain bearings, pins, cams, slides, etc.
Suitable for applications where contamination by aggressive chemicals or petroleum based solvents, oils and greases would destroy conventional lubricants.
Specification
Temperature Range: - 200°C to +450°C
Load Resistance: up to 7,000 kg/cm2
COSHH Datasheet: Download 0299
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
GHS02 Flammable
GHS05 Corrosive
GHS07 Health hazard/Hazardous to the ozone layer