ROCOL BELT DRESSING Spray is a colourless, non-toxic adhesive and conditioning spray that provides instant grip to prevent belt squeal, slippage and wear. The conditioning properties prevent the belt from drying out and cracking to both increase transmission efficiency and extend belt life. Completely insoluble in water, making it equally effective in damp or wet environments.
Just a thin film of BELT DRESSING Spray increases adhesion when belts are in contact with drive pulleys, reducing belt slippage that leads to glazing and over-heating.
NSF H1 registered, Halal and Kosher certified.
Specification
Temperature Range: +50° C to +100ºC
COSHH Datasheet: Download 0375
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
GHS02 Flammable
GHS07 Health hazard/Hazardous to the ozone layer
GHS09 Hazardous to the environment