ROCOL DRY MOLY Spray is a high purity,extreme load dry film molybdenum disulphide spray designed for use where a wet lubricant cannot be tolerated.
This assembly lubricant is ideal for sliding surfaces, such as plain bearings, pins, cams and slides. It reduces friction and therefore increase life of moving parts in highly corrosive environments.
DRY MOLY Spray can also be used in conjunction with a wet film lubricant enhancing performance and extending life of components and assemblies. Also available as a paste.
Rolls Royce, RAF, Naval and NATO approved
Specification
Temperature Range: -50°C to + 450°C
Load Resistance: up to 7,000 kg/cm2
COSHH Datasheet: Download 0295
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
GHS02 Flammable
GHS07 Health hazard/Hazardous to the ozone layer