KPX6432120 64 32 120 Electronics End Cutting Nipper

Knipex 64 Series Precision End Cutting Nippers with multi-component grips. Ideal for ultra fine cutting work, e. g. in electronics and fine mechanics. They have a smooth operating box joint with zero backlash. Such joints are characterised by the fact that the inner handle is guided on both sides by two extensive bearing surfaces. This prevents the tilting movements which occur with lap joints, and has a positive effect on the quality of cutting processes and tool life. 

In addition to oil hardening of the entire pliers, the cutting edges are induction hardened to at least 60 HRC. The low friction double spring is an advantage ergonomically. It produces a gentle, steady opening after cutting.

They have a mirror polish and a fine oil film for corrosion protection. With occasional re-oiling of the surface, this rust protection is completely sufficient for workshop operation. As a result, for safety reasons these electronics pliers are also ideal for sensitive electronics environments. There are no pieces of chrome that could peel off and damage circuits. The quality machining of the pliers corresponds to the needs of electronics and micromechanics: high requirements regarding precision, function and reliability.

Knipex 64 42 115 Electronics End Cutting Nippers for cutting fine wire and cable from the front at an angle of 15° to the surface

Specification:

Length: 120mm
Cutting Capacity Ø: Medium Hard Wire 1.0mm,
Hard Wire 0.5mm
Head Width (A): 11mm
Jaw Length (B): 10mm
Jaw Thickness (Joint) (D): 7mm
Cutting Edge Length (C): 17mm