Bondloc B638 Retainer is designed to give high strength retention under cyclic loading. It can retain its full strength and not suffer fatigue under load stress.
It is a cylindrical parts supplement, suited to structural components such as cylindrical parts under dynamic load, keys, splines, even structural tubing with close tolerance fit.
Specifications:
Resin: Urethane Acrylate.
Colour: Green.
Fixture Speed No Activator: 5 mins.
Fixture Speed With Activator: <5 mins.
Viscosity: 2500 cps.
Gap fill: 0.2mm.
Flash Point: >85°C.
Shelf Life: 12 months min.
Specific Gravity: 1.08.
Max Operating Temperature: -55°C to + 150°C.
Cured Performance:
Full Cure Time: 24 hours.
Static shear strength: 30 N/mm².
Bondloc High Strength Retaining Compound.
Size: 50ml.
COSHH Datasheet: Download 2016
H318 Causes serious eye damage.
H317 May cause an allergic skin reaction.
H335 May cause respiratory irritation.
H413 May cause long lasting harmful effects to aquatic life.
P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.
P264 Wash … thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
P302 + P352 IF ON SKIN: Wash with plenty of water/…
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P310 Immediately call a POISON CENTER/doctor/ …
P312 Call a POISON CENTER/doctor/…/if you feel unwell.
P321 Specific treatment (see … on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container to …
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
GHS05 Corrosive
GHS07 Health hazard/Hazardous to the ozone layer