Bondloc B2060 is a 60 second, 2-part, rapid cold curing epoxy adhesive. It is suitable for bonding a wide variety of surfaces including steel, aluminium and galvanised iron. It reacts within a minute to give a tough resilient bond on a wide variety of surfaces.
Specifications:
Mix Ratio 1:1
Work Life as a Mix: 40 - 70 seconds
Size: 25ml
Part 1
Physical Form: Viscous liquid
Chemical Type: Epoxy
Appearance: Clear
Viscosity @ 25°C: 100 poise
Specific Gravity: 1.17
Part 2
Physical Form: Viscous liquid
Chemical Type: Mercaptan and Polyamide
Appearance: Blue
Viscosity @ 25°C: 130 Poise
Specific Gravity: 1.14
COSHH Datasheet: Download 1999
H317 May cause an allergic skin reaction.
H332 Harmful if inhaled.
P260 Do not breathe dust/fume/gas/mist/vapours/ spray.
P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.
P264 Wash … thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
P302 + P352 IF ON SKIN: Wash with plenty of water/…
P310 Immediately call a POISON CENTER/doctor/ …
P312 Call a POISON CENTER/doctor/…/if you feel unwell.
P321 Specific treatment (see … on this label).
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P363 Wash contaminated clothing before reuse.
P405 Store locked up.
P501 Dispose of contents/container to …
P102 Keep out of reach of children.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting
GHS05 Corrosive
GHS07 Health hazard/Hazardous to the ozone layer